High Efficient Automatic Cut To Length Line Cut To Length Roll Forming Machine
Application: It is suitable for cut the metal coils to sheets/plates.
Advantages: Easy to operate, cut to length quality is high, excellent material utilization, Stepless shearing speed regulation, etc.
Structure: It consists of uncoiler, feeding and positioning, cutting unit, stack, etc.
Applicable materials: Tinplate, silicon steel, aluminum, copper, stainless steel and galvanized steel, etc.
Coil preparation → Feeding → Uncoiling → Peeler → Reverse bending roll → Pinch feeding → Pre-leveling → Loop bridge → Aligning Device → Precision Leveling → fixed length measurement → tail board pinching → Flying Shear → Conveying → discharge frame → Lifting table→discharge car
Model List
| Model |
Thickness |
Width |
Length |
Leveling speed |
| CTL-2x1000 |
0.2-2.0mm |
400-1000mm |
adjustable |
Max 100m/min |
| CTL-3x1250 |
0.3-3.0mm |
500-1250mm |
adjustable |
Max 100m/min |
| CTL-4 X1500 |
0.6-4.0mm |
500-1500mm |
adjustable |
Max 80m/min |
| CTL-5x1600 |
1.0-5.0mm |
500-1600mm |
adjustable |
Max 80m/min |
| CTL-6x1600 |
1.0-6.0mm |
600-1600mm |
adjustable |
Max 40m/min |
| CTL-8 x1800 |
2.0-8.0mm |
1000-1800mm |
adjustable |
Max 30m/min |
| CTL-10 X2000 |
3.0-10mm |
1000-2000mm |
adjustable |
Max 30m/min |
| CTL-12 x1600 |
3.0-12mm |
600-1600mm |
adjustable |
Max 20m/min |
| CTL-16x1800 |
4.0-16mm |
1000-1800mm |
adjustable |
Max 20m/min |
| CTL-20 X2000 |
5.0-20mm |
1000-2000mm |
adjustable |
Max 20m/min |
| CTL-25X2500 |
8.0-25mm |
1000-2500mm |
adjustable |
Max 20m/min |
Entry Car
Function: It move the entry car and cylinder up through the motor, until the mandrel of the uncoiling inserts into the inner hole of the coil and receives the coil.
Uncoiler
Function: the machine is a device for placing coiling plates, it receives coils by operating the sliding cylinder of the fuselage and the expanding and contracting cylinder of the spindle to complete the process of uncoiling and shearing.
Gantry Type Feeder Device
Function: the machine is used for uncoiling feeding and introduces the coil head into the next equipment. The feeding roll is driven by a large torque motor to assist the uncoiling to rotate ad feed the coil through a hydraulic cylinder. The feeding shovel head extends to the steel coil head under the action of hydraulic cylinder. When the feeding head passes through the feeding bracket, the straight head is driven down by the cylinder, and the bending feeding head is pressed down, so that the feeding head is fed back to the next equipment. The uncoiling operation is driven by the oil pressure.
Pre-leveling Machine
Function: The sheet metal is clamped into the leveling roll system by the pinch roll, and the yield stress is released repeatedly after the upper and lower leveling rolls are extruded to achieve the purpose of pre-leveling.
Hydraulic Side Guide
Function: When the sheet metal enters the device, the vertical roll alignment on both sides is adjusted to the position of sheet width, and the positioning guide plate is brought into the finishing machine.
Precision Leveler
Function: The sheet metal is clamped into the leveling roll system by the pinch roll, and the yield stress is released repeatedly after the upper and lower leveling rolls are extruded to achieve the purpose of fine leveling.
Hydraulic Shear Machine
Function: After the steel plate is fed by the leveller and output according to the size and length set, the signal is transmitted to the machine for receiving, and the steel plate can be automatically cut.
Conveyor Thrower
Function: In order to reduce the deformation of the leveled steel strip during shearing, the unit smoothly transports each steel plate to the stacker platform.
Lifting Palletizer
Function: After leveling and shearing, the steel plate slides and falls on the machine, which can control the lifting of the Stacking platform, so as to ensure the minimum falling difference of the sheet material, reduce the friction between the sheets and collect neatly, After the stacking is completed, the finished products can be directly lifted away from the stack.
Exhibitions & Customer Visits
1. Q : Are you manufacturer ?
A: Yes, We are manufacturer . More than 20 years R&D and Manufacturing Experience. We use more than 130 CNC machining equipments to guarantee our products perfect.
2. Q: What payment terms do you accept?
A: We are flexible on payment terms, please contact us for details.
3. Q:What information do you need to supply a quotation?
A: 1.Maximum Yield Strength of the material
2.All pipe sizes needed (in mm)
3.Wall thickness (min-max)
4. Q: What is your advantages?
A: 1. Advanced mould share-use technology (FFX, Direct Forming Square). It saves a lot of invest amount.
2. Latest quick change technology to increase the output and reduce labor intensity.
3. 130 CNC machining equipments to guarantee our products perfect.
4. More than 20 years R&D and Manufacturing Experience. 5. Customized According to Customer Requirements.
5. Q: Do you have after sales support?
A: Yes,we have. We have a 10-person -professional and strong installation team.
6.Q: How about your service?
A: 1. One year's warranty.
2. Providing spare parts for life time at cost price.
3. Providing Video technical support, Field installation, commissioning and training, online support, Engineers available to service machinery overseas.
4. Provide technical service for facility reforming, refurbishment.
Audited Supplier 
){kind=link}